SH Series Sprag Clutch Holdbacks
Renold Sprag clutch Holdbacks with Central Torque Arms are self contained units ready for mounting on the headshafts, or other suitable driving shafts, of inclined conveyors or elevators to prevent run back.
Features
- High precision sprags create instantaneous action with ZERO BACKLASH
- High quality, high precision heavy duty bearings for arduous applications
- SH clutches designed for LONGLIFE and lower overall operating cost
- Able to accommodate LARGE BORES (up to 20") and HIGH TORQUE CAPACITY within compact design
- Dimensionally INTERCHANGEABLE one piece central torque arm design for ease of replacement against other brands
- Quick disconnect mounting pins for fast torque arm removal
- Enhanced labyrinth sealing for use in hostile environments
- Grease or oil filled options available
- Axial retaining collars available for all sizes
- Renold Sprag Clutch RE-CONDITIONING SERVICE TO NEW available on all sizes
Typical Applications
- Inclined belt conveyor
- Bucket elevator
If reverse rotation occurs serious safety problems would be created and possible machinery failure.
To overcome the problem of drive reversal a Renold Sprag Clutch holdback is fitted to the conveyor headshaft and held with a torque arm against stops fitted to the framework of the conveyor.
Aggregates Industry
Renold SH Sprag Clutch Holdbacks are used in the aggregates industries Worldwide, often in conjunction with high quality RENOLD GEARBOXES, typically on inclined conveyors.
The SH Sprag Clutch Holdback is positioned on the end of the conveyor headshaft. If the drive fails or is stopped when the conveyor is loaded the SH Sprag Clutch Holdback instantaneously prevents any runback. This is due to the sprag elements of the clutch being in constant contact at all times with the inner and outer races of the clutch element of the holdback. Resultant downtime is prevented and also any potential accident risk to personnel.
Renold SH Sprag Clutch Holdbacks are ideal for use in the aggregates industry being equipped with high quality seals that prevent contaminants from reaching internal parts and ensuring long unit lifetime.
Mining
Renold SH Sprag Clutch Holdbacks are fitted to inclined conveyors used to transport bulk materials in many coal or iron ore mines around the World. A typical example of a mine application is shown on the right. Fitted to an apron feeder drive in an iron ore mining plant in Canada the SH Sprag Clutch Holdback with Central Torque Arm prevents any runback in the drive, if the drive fails or is stopped. This is due to the sprag elements of the clutch being in constant contact at all times with the inner and outer races of the clutch element of the holdback. Resultant downtime is prevented and also any potential accident risk to personnel.
The high quality components and overall robustness of the Renold SH Sprag Clutch Holdback with Central Torque Arm design is ideally suited to the heavy duty and hostile environment that apron feeders operate in ensuring long unit lifetimes.
Material Handling
Renold SH Sprag Clutch Holdbacks are fitted to many inclined conveyors and bucket elevators that transport bulk handling materials around steel works, such as coking coal and iron ore, major docks, moving bulk materials to storage and many other sites around the World.
Whenever a Renold SH Series Sprag Clutch Holdback is fitted it provides the user with complete peace of mind knowing that not only have they purchased a holdback that provides instant runback protection every time when needed, but is also of the highest quality and the knowledge that a superb back up service is available to enhance their investment even further.
